Ļauj ātri un droši veikt nīšu un kontaktu remontu. Polimēr-sudrabota kompozīcija veido uz stikla virsmaselektovadošu kārtu ar tādu pašu elektrisko pretestību, kāds ir apsildītāja nīšu materiālam. Nodrošina elektrovadošas kārtas diūziju stiklā un ilglaicīgu rezultātu sasniegšanu. Remontē līdz 20cm pārravumu. Var pielietot autodarbnīcās un pašrocīgi. Iepakojums paredzēts vairākkārtējai pielietošanai.
Jāparbauda visas nītis un jāatrod pārrāvumu. Notīrīt un attaukot stikla virsmu pie pārrāvumiem ar samitrinātu spirta salveti. Abās pārravūma pusēs pielīmēt skoču. Sajaukt sudraba kompaundu ar aktivatoru. Sajaukto sastāvu jaizmanto 20-25min. laikā. Uzklāt sastāvu ar koka kociņu uz remontējamam vietām. Pēc 30 min. kārtīgi un lēni noņemiet skoču.
Sastāvā: epoksīda un polimērie sveķi, sudrabs, piedevas.
Remonta komplekta Video apskats
How to Use
CLEAN: Use the alcohol cleaning cloth to thoroughly clean the broken grid line and the surrounding area. Ensure it is completely dry and free of grease.
ALIGN: Tear off a piece of the alignment tape and carefully apply it along both sides of the broken line to protect the good grid and ensure a neat application.
MIX & APPLY: Mix the conductive epoxy thoroughly with the provided stick. Use the cotton swab to apply a thin layer of the paste over the break, covering it completely.
CURE: Wait for about 10 minutes for the epoxy to become touch-dry. Gently peel off the alignment tape.
FINISH: Wipe away any excess adhesive with the cloth. Allow 24 hours for the repair to fully cure before using the defroster.
Precautions
⚠️ For repairing conductive grid lines only. Not for structural glass repair.
⚠️ Ensure the vehicle's defroster is TURNED OFF during application and curing.
⚠️ Work in a well-ventilated area. Avoid inhaling fumes.
⚠️ Wear gloves to avoid skin contact with the epoxy. If contact occurs, wash with soap and water.
⚠️ Keep out of reach of children and pets.
⚠️ Do not use on major breaks or completely missing grid sections. Designed for minor to moderate breaks.
Package Included
1 x Bottle of Conductive Repair Epoxy (5.8*2.6cm)
1 x Pack of Alignment Tapes (5*1cm)
Several x Applicator Swabs (7.4cm)
1 x Alcohol Cleaning Cloth (10*10cm)
1 x Mixing Stick (8.3cm)
1 x Instruction Manual (15*15cm)